Am I doing it wrong? - - Infiniti G35 & G37 Forum Discussion | baltiyskiy-vokzal.ru
Show Your Support Become A Premier Member

    > >
  • Reload this Page >
    • Am I doing it wrong?


Am I doing it wrong?

Thread Tools Rate Thread
Old 11-30-2017, 08:03 PM
Chipskream's Avatar
Registered User
Thread Starter
Join Date: Jul 2017
Posts: 15
Thanked 0 Times in 0 Posts
Am I doing it wrong?

Alright, so I installed a catch can on a car for the first time. I got sick of looking for 1/2" fuel line so I just ended up doing this:

- Vented catchcan with 1 inlet capped off
- PCV Return line to the manifold capped off
- then 1 3/8" FI hose from the PCV to the catch can

Started and ran the car, everything seems cool. Just wanted to make sure since this is my first time.


Old 11-30-2017, 10:18 PM
's Avatar
Cleric670
Join Date: May 2017
location: Washington State
Posts: 1,640
Thanked 138 Times in 135 Posts
You'll know you did it wrong if it builds up pressure in the valve cover and blows out the gasket which is time consuming to replace
Old 11-30-2017, 10:26 PM
Chipskream's Avatar
Registered User
Thread Starter
Join Date: Jul 2017
Posts: 15
Thanked 0 Times in 0 Posts
Quote:
Originally Posted by [email protected] View Post
You'll know you did it wrong if it builds up pressure in the valve cover and blows out the gasket which is time consuming to replace
Yes, quite the situation I am trying to avoid. I just wanted to double check my thinking that venting PCV to a vented catch can with the return capped is right.

Guess at this point if something like that happened the damage is done.
Old 11-30-2017, 10:27 PM
's Avatar
Cleric670
Join Date: May 2017
location: Washington State
Posts: 1,640
Thanked 138 Times in 135 Posts
A vented can usually won't have a return, are you sure it's not just a double inlet can?
Old 11-30-2017, 10:32 PM
Chipskream's Avatar
Registered User
Thread Starter
Join Date: Jul 2017
Posts: 15
Thanked 0 Times in 0 Posts
Here is the guy I am using off of ebay. It is a double inlet can, until I can get to the rear valve cover vent I blocked off the second one.


Old 11-30-2017, 10:35 PM
's Avatar
Cleric670
Join Date: May 2017
location: Washington State
Posts: 1,640
Thanked 138 Times in 135 Posts
The driver side vent is really easy to access once you pull off the intake pipe, leave the MAF/airbox, there is enough play in the "accordion" section to remove just the intake tube and leave everything else in place.

Obviously you have to take the strut tower brace off.
The Following User Says Thank You to [email protected] For This Useful Post:
Chipskream (11-30-2017)
Old 11-30-2017, 11:16 PM
Chipskream's Avatar
Registered User
Thread Starter
Join Date: Jul 2017
Posts: 15
Thanked 0 Times in 0 Posts
Right on, thank you. I will give that a go tomorrow after work. I need a couple more feet of 3/8" anyways.
Old 12-01-2017, 01:01 AM
gary c's Avatar
SLICK
iTrader: (10)
Join Date: Feb 2005
location: Valencia, Ca
Posts: 18,986
Thanked 1,046 Times in 931 Posts
I suggest you do the Search (catch can install) and start over before this failure causes major issues! And don't install a vented catch can!
Gary
Old 12-01-2017, 07:39 AM
Chipskream's Avatar
Registered User
Thread Starter
Join Date: Jul 2017
Posts: 15
Thanked 0 Times in 0 Posts
Well, I found a motordyne35 video on youtube, which is where I came up with this. basically this is 1/2 of it implemented. So I guess I did follow a video, as I said I was going to do the rear one also but ran out of time after the SS brake lines and Master Cylinder

here is the video:

EDIT: I guess if I did it wrong, fine. I think I just did it different. Reminds me of an elaborate PCV filter that you see honda's running all the time. Maybe I was asking for a conversation on why it might be wrong not just, "it's a failure"

Last edited by Chipskream; 12-01-2017 at 08:02 AM. Reason: Second thoughts.

Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 07:59 AM.


Copyright ©2002 - 2017, baltiyskiy-vokzal.ru All Rights Reserved. We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in:

Related pages


fuse obdinfiniti fx35 mpgroem-nis2cost to replace serpentine belt350z wheelsdeepstage motorsportsdockstubzfender rolling san diegog35 service manualiridium spark plugs vs platinum spark plugsbrembo break padspontiac g8 gt forumskyline v36vertini magic blackhow to install brembo brakessears low profile floor jack2003 infiniti g35 tail lightsclarion headrest monitorscochran infiniti pittsburghcheap clay barxxr 521 18x10 5aacstyle.comtien shocksmrr wheels for salepermaseal car wax reviewsinfiniti body kitreplacement hid bulbengine pinging under load350z headlight ballastg35 statsbest turbos for 300zxtint spray for tail lightsgodspeed turbo kit reviewnissan 350z single turbo kitreplace coolantsundown sa 12 specs2011 nissan altima service engine soonhard accelerator pedalposi quiet ceramic brake pads reviewwix air filter reviewppe headersinfiniti g35 tire pressure sensorvin specs lookuppolished te37g35 aftermarket tail lightstensioner nutebay exhaust systemvortech v3plasti dip truck rimstire rubbing noise when drivingkal tire calgary north hillcattman exhaustpioneer avic z120bt manualwhat does engine pinging sound likekvt 512 kenwoodnissan 370z fast intentions exhaustturbo kit g37memphis audio 4 channel ampperma seal sprayameriprise costco insurancevarrstoen es1 192003 nissan altima service engine soon light2008 g35xsstance g35g37 tunewiper blades insertsce28 whiteclub silk pechangallumar dubairaindrop noiseg35 front liprpf1 center cap