DIY - Transgo Valve Body Upgrade - - Infiniti G35 & G37 Forum Discussion | baltiyskiy-vokzal.ru
Show Your Support Become A Premier Member

    > >
  • Reload this Page >
    • DIY - Transgo Valve Body Upgrade


DIY - Transgo Valve Body Upgrade

Thread Tools Rate Thread
Old 11-01-2009, 10:00 PM
Registered User
Thread Starter
Join Date: Oct 2009
location: McDonough, GA
Posts: 23
Thanks: 0
Thanked 5 Times in 1 Post
DIY - Transgo Valve Body Upgrade

I'm going to start off with saying this "kit" is not for someone who has never worked on cars ..

I AM NOT responsible if you mess up your car, tranny, fingers, etc

this is just a tool to help someone decide if they want to do this mod themselves or pay someone

and if you do decide to do it yourself, this should help make the install go smoothly :thumbup:

.................................................. ................................................

Tools -

10mm, 14mm, 19mm sockets / 14mm wrench
drain pan
torque wrenches (ft lb for drain plug .. inch lb for everything else) - I had to buy inch lb torque wrench .. $40 napa
funnel
5mm allen head socket
stiff wire (use to help get shims out valve body)
dikes / pliers
flat screwdriver
punch or 1/4" drive extension (drive in tapered orfice)
light hammer

Supplies -

8 quarts NISSAN S-MATIC ATF (do not use anything else) $8.12 / quart with discount (work at dodge dealer) .. they wanted $18
two rolls of paper towel or shop towels
Transgo Valve Body Upgrade Kit $295 (really fast free shipping from forged performance .. also avail. GTM)
Vaseline or suitable assembly lube / grease (hold ***** in place)


Instructions -

Download both VB Removal and Transgo Install pdf files off GTM website

Start One Day Trial with transgo website and download three more files

(Study all and become familiar with the parts, bolts, etc before starting)


1) Jack car up and set on jack stands, then drain tranny fluid (4 quarts), re-install drain plug at 35 ft lb

Name: IMG_1249.jpg
Views: 346
Size: 114.0 KB

Name: IMG_1256.jpg
Views: 345
Size: 111.1 KB

2) Remove two bolts holding the bracket that 02 sensor wires mount to .. one on passenger side with 14mm wrench .. drivers side with socket .. then remove wire clip from bracket for easy install

unclip o2 sensor wires and push everything out of the way

Name: IMG_1260.jpg
Views: 344
Size: 141.8 KB

Name: IMG_1264.jpg
Views: 341
Size: 77.7 KB

Name: IMG_1266.jpg
Views: 341
Size: 84.1 KB

3) Take 10mm bolts out of tranny pan and drop, drain, and put to the side (wont need it for a while)

there will be another quart or so in the pan

then you see this

Name: IMG_1267-1.jpg
Views: 348
Size: 157.6 KB

4) Get out the instructions .. unhook the wires on the bottom .. then take out and label bolts according to the diagram (A, B, C, ETC) ... I used paper with letters on them to organize the bolts (or you could use bags)

get organized b/c there are ALOT of pieces to keep up with

Name: IMG_1269.jpg
Views: 340
Size: 129.6 KB
Name: wire.jpg
Views: 342
Size: 114.6 KB

NOTE - Unclip the two things circled in red before unbolting .. clip on side of the VB sucks when your holding the vb up .. haha

5) BE CAREFUL dropping the valve body .. there are wires you have to disconnect on top (around 6" of slack in them)

put a glove on or paper towel between your hand and the valve body .. this is where I cut my finger .. the pickup is razor sharp

after that little struggle .. you get this


Name: IMG_1271-1.jpg
Views: 338
Size: 135.6 KB

go ahead and take a break b/c that was the "easy part" ..the harder part is next

6) Following the instructions for removing electronics / solenoids .. remove / label bolts and keep solenoids in order

Name: IMG_1275.jpg
Views: 358
Size: 122.4 KB

7) Remove / Label filter bolts .. then remove the manual valve body and watch for the spring and ball inside

Name: IMG_1277.jpg
Views: 395
Size: 125.2 KB

Name: IMG_1281.jpg
Views: 377
Size: 156.7 KB

Name: IMG_1280.jpg
Views: 336
Size: 93.0 KB

8) Remove Temp Sensor and Relief Ball & Spring

Name: tempsensor.jpg
Views: 337
Size: 94.1 KB

Around now you should have something that looks like this

Name: IMG_1284.jpg
Views: 338
Size: 134.8 KB

9) Again follow the instructions to remove the upper to lower vb bolts .. and lower to upper

then lift the upper vb off WITH the separator plate so the ***** don't fall out of the upper .. flip over as an assembly and set down (no mods to upper)

only lower vb and separator plate get worked on

also .. take note where the ***** are in the lower vb section (yours may differ by VB)

Name: vbballs.jpg
Views: 338
Size: 110.5 KB

Name: IMG_1285.jpg
Views: 340
Size: 111.0 KB

10) The fun part begins .. installing the kit .. take out the transgo vb install instructions and follow them for location and color of springs

DO ONE AT A TIME and double check everything

I used a piece of thick wire with a hook on the end to help push out the shims .. installing springs on left side is easy, right side are stiffer / harder

Name: IMG_1292.jpg
Views: 338
Size: 144.6 KB

Name: IMG_1293.jpg
Views: 337
Size: 164.4 KB

Name: IMG_1294.jpg
Views: 337
Size: 162.8 KB

Name: IMG_1295.jpg
Views: 337
Size: 119.3 KB

Name: IMG_1296.jpg
Views: 336
Size: 140.3 KB

Name: IMG_1297.jpg
Views: 335
Size: 173.7 KB

Name: IMG_1298.jpg
Views: 337
Size: 161.4 KB


and your organized mess of parts should look like this now

Name: IMG_1291-1.jpg
Views: 338
Size: 142.2 KB

11) Measure each drill bit in the kit and / or order them from small to large .. then carefully drill out the seperator plate holes according to the instructions

BE VERY CAREFUL AND DOUBLE CHECK THE locationS BEFORE DRILLING

I noticed the holes are shiny that need to be drilled out .. if you locate a hole and it isnt shiny .. dont drill it out and check it again

Name: IMG_1299.jpg
Views: 339
Size: 100.9 KB

12) Make sure the separator plate is clean of metal shavings, check all of the ***** in upper and lower VB (I put Vaseline on them to be safe and hold them) .. then Vaseline the filters onto the separator plate

carefully flip upper vb / separator plate over onto lower and make sure the filters stay in place and aligned

Torque to - 65 to 70 inch pounds

then start assembling reversal of the instructions .. make sure to put the bolts in the correct holes

Name: IMG_1300.jpg
Views: 333
Size: 129.3 KB

Name: IMG_1302.jpg
Views: 336
Size: 121.8 KB

13) Re-Install manual valve body, vb filter, temp sensor and relief ball / spring

NOTE - Everything torques to 65 to 70 INCH lb

Name: IMG_1304.jpg
Views: 336
Size: 92.7 KB
Vaseline the ball to help keep it in place
Name: IMG_1305.jpg
Views: 340
Size: 136.1 KB

Name: IMG_1306.jpg
Views: 339
Size: 112.8 KB

14) Re-Install Electronics board, Soleniods (in order), and wiring

Name: IMG_1308.jpg
Views: 337
Size: 106.9 KB

Name: IMG_1309.jpg
Views: 340
Size: 105.6 KB

Name: IMG_1310.jpg
Views: 420
Size: 121.8 KB


15) Tap the "tapered orfice" into the hole in the transmission before putting the valve body back in .. make sure it is below the surface

I used a 1/4" drive extension .. book says punch .. but either works

Name: insert.jpg
Views: 339
Size: 102.0 KB

16) INSTALL VB

I got my brother to help since it is awkward to hold, hook up wires, align and bolt up

follow instructions for bolts, but make sure you get this metal stud in the little clip up in the tranny

Name: wireclip.jpg
Views: 341
Size: 75.2 KB


17) bolt up the pan .. torque to 95 inch lb (service manual says 7.9 ft lb) .. then bolt the bracket for the o2 sensor wires back up

Name: IMG_1315.jpg
Views: 352
Size: 122.3 KB

18) lower the car down and fill up the transmission (mine took just over 7 quarts) .. start engine, run through each gear P, R, N, D ... after 5 minutes check cold side of dipstick ..

once you get it right .. bolt the dipstick down and

DONE !!!

just hope it works .. take it for a drive .. be easy for a few miles and shifting through all gears a few times (get air out of vb)

then let it rip .. just watch out for telephone poles and ditches .. haha

it was raining when I finished .. every shift over 4K threw the car sideways and tires spinning

If anyone has any questions just shoot me a PM ..
The Following 5 Users Say Thank You to adrians07z For This Useful Post:
EGGPLANT (02-05-2013), JaE35 (03-03-2012), prinny (06-03-2012), roaminggnome (05-03-2012), Skyline300 (06-10-2013)
Old 11-01-2009, 10:01 PM
Registered User
Thread Starter
Join Date: Oct 2009
location: McDonough, GA
Posts: 23
Thanks: 0
Thanked 5 Times in 1 Post
MODS - Move to Drivetrain DIY section



EDIT - Thanks

Last edited by adrians07z; 11-01-2009 at 10:20 PM.
Old 11-02-2009, 04:06 PM
Registered User
Thread Starter
Join Date: Oct 2009
location: McDonough, GA
Posts: 23
Thanks: 0
Thanked 5 Times in 1 Post
video I shot on the way home from work when I found a break in the traffic ..


turning right on to a highway .. if you turn the volume up you can hear the tires chirp


Old 11-02-2009, 04:30 PM
talimac's Avatar
Registered User
iTrader: (8)
Join Date: Apr 2008
location: San Diego/Kapolei
Posts: 171
Thanked 2 Times in 2 Posts
Nice write up, I would never attempt to do this myself. I wish you lived nearby, cause i would definitely pay you to assist. haha
Old 11-02-2009, 09:40 PM
Registered User
Thread Starter
Join Date: Oct 2009
location: McDonough, GA
Posts: 23
Thanks: 0
Thanked 5 Times in 1 Post
you could always just drop the vb and send it to me


then you can do this Name: drivingskid1.gif
Views: 337
Size: 8.2 KB (I edited it for us 5AT owners .. haha)
Old 11-02-2009, 10:12 PM
GreenGoblin's Avatar
The goblin resurrection
iTrader: (66)
Join Date: Oct 2006
location: In my garage
Posts: 25,862
Thanked 184 Times in 92 Posts
Awesome bro, where are you located?
Old 11-02-2009, 10:22 PM
Registered User
Thread Starter
Join Date: Oct 2009
location: McDonough, GA
Posts: 23
Thanks: 0
Thanked 5 Times in 1 Post
just south of Atlanta, Ga


McDonough


(just added it to profile .. just signed up on here recently before doing the vb upgrade)
Old 11-02-2009, 11:01 PM
GreenGoblin's Avatar
The goblin resurrection
iTrader: (66)
Join Date: Oct 2006
location: In my garage
Posts: 25,862
Thanked 184 Times in 92 Posts
I am sure some locals will be contacting you for help/
Old 11-25-2009, 04:02 PM
Registered User
iTrader: (5)
Join Date: Aug 2008
location: Michigan
Posts: 130
Thanks: 0
Thanked 0 Times in 0 Posts
Thanks for the great DIY! The info you provided was great. I used it for the removal and install of the valve body but, I decided to send it to injected performance for the actual modification.
Old 11-25-2009, 04:43 PM
bigc's Avatar
Wings Nation
iTrader: (59)
Join Date: Feb 2007
location: SoCal
Posts: 7,892
Thanked 613 Times in 447 Posts
nice DIY and thanks for sharing this with the community. the transgo kit makes a huge difference!
Old 11-26-2009, 02:40 PM
Registered User
iTrader: (9)
Join Date: Oct 2009
location: So. CA
Posts: 658
Thanked 15 Times in 14 Posts
what an awesome DIY!
Old 12-08-2009, 04:49 PM
Registered User
iTrader: (1)
Join Date: Oct 2009
location: Griffin, GA
Posts: 46
Thanks: 0
Thanked 0 Times in 0 Posts
Adrian,
How much did the kit cost? Also I live in Griffin and would love to try and do this mod. If you are interested in helping or getting paid to do it, I would love to talk about it.

Thanks....






Quote:
Originally Posted by adrians07z View Post
just south of Atlanta, Ga


McDonough


(just added it to profile .. just signed up on here recently before doing the vb upgrade)
Old 12-08-2009, 06:22 PM
Registered User
Thread Starter
Join Date: Oct 2009
location: McDonough, GA
Posts: 23
Thanks: 0
Thanked 5 Times in 1 Post
It costs $295 shipped for the "kit" from GTM Motorsports, or Forged Performance


I got mine from forged .. really fast shipping since they are in marietta, ga (just above atlanta)

would of gone and picked it up but didnt have time off work during the week and its free shipping
Old 01-03-2010, 06:29 PM
Drewer's Avatar
Registered User
iTrader: (9)
Join Date: May 2003
location: Warshington
Posts: 1,820
Thanks: 0
Thanked 2 Times in 1 Post
SuhWEET awesomeness! Thank YOU SO MUCH for trailblazing this! This will be my next mod. . .when I get time.

Two questions:
1. Do you have a tranny cooler and/or trans temp gauge?
2. Does the vaseline have any negative effects? I guess it is just oil "jelly." <--- sorry total newb question.
Old 01-03-2010, 07:25 PM
Registered User
Thread Starter
Join Date: Oct 2009
location: McDonough, GA
Posts: 23
Thanks: 0
Thanked 5 Times in 1 Post
I dont have a bigger cooler or a temp gauge ..


I will probably upgrade the cooler later on .. dont really run the car hard right now, just daily traffic with some fun


this is my most favorite mod so far .. makes the auto fun, just gotta be careful when its cold or wet b/c the back end likes to move around if you get on the gas too much


as for the vaseline .. my friends dad was a tranny specialist and told me that trick .. just melts once it warms up .. doesnt hurt anything

think I saw somewhere you can use some type of assembly grease too

Related Topics
Thread Thread Starter Forum Replies Last Post
Cleaned Throttle Body and now Idle Hunt, ECU Reflash or New TBs? esotericrider G35 Sedan V36 2007- 08 19 07-29-2017 10:58 AM
FS: 19x8.5 Concept One RS8 matte black w/chrome $1k obo Machine Head 19 Inch 3 03-16-2016 08:55 PM
deal or no deal? TrillO.G.35 G35 Coupe V35 2003 - 07 14 09-05-2015 02:06 AM
Fixed inifiniti's brake design flaw with Nissan akebono big brakes Machine Head G35 Sedan V35 2003-06 19 09-04-2015 07:22 PM
Valve cover change - Oil on spark plug - compilation thread yassy G35 Sedan V35 2003-06 3 08-09-2015 07:31 PM


Tags
body, diagram, g35, g37, infiniti, kit, my350z, o2, problem, solenoid, spring, transgo, upgrade, valve, valvebody
Thread Tools
Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -4. The time now is 11:49 AM.


Copyright ©2002 - 2017, baltiyskiy-vokzal.ru All Rights Reserved.

Related pages


vct solenoid stuck openhow to fix fuel gauge on carg37 weightweapon r secret intake reviewavh p1400dvd wiring harnessg35 front lipdepos headlightsgoodyear infinity tiresfuelman of dfwintake timing control valve solenoid valveg35 gtg35 stockeuroline dhinfiniti g37 coupe enginejdm nismohow to test a crank sensormid muffler deletejl 10w3battery relocation diykw coilover reviewcan you mix dot3 and dot4 brake fluidcleaning afe filterwindow tint law in va19x10 5 wheelsautozone wheel bearing350z engine lightreplica bbs lmaftermarket auxiliary input car stereohow to program a viper remote startdual piston caliperstance springsaux cable rcaalpine iva-w505 pricewheel lug lock keyis lojack worth it for carsboston component speakers350z fourmwheel spacers safe or notbest coilovers for 350ztein 350z coiloversnissan key fob battery replacementsts turbokenwood ddx 418compustar alarm systemwhat makes the steering wheel shake2012 bmw 335i reliabilityexhaust system brandsbose cd player not workingsrt 4 lipheat shield rattle noisegtr r35 wheelshow to open infiniti key fobmaine temp platesrain x wiper blade reviewsturtle wax clarifying compoundrohana concave wheelscar wont accelerate but rpms go up350z manual transmission fluidfalken 722cheap exhaust cutoutspioneer avh p6800dvd2005 infiniti g35 awd2008 g35xs300zx aluminum driveshaftnismo gear knob 350zhow much does butterfly doors costlow profile car ramps sports cars2005 350z 0-60infiniti g35 key fobg37 or 370zdoor detentsinfiniti build your ownpurolator reviewrear rotor removalcan you put staggered wheels on awdlowering springs frsinfiniti g35 nismobrembo brake calipers price